Iluminación FLSUN QQ-S

thingiverse

I have created these LED COB light supports for my printer. The LED screen I purchased from https://es.aliexpress.com/item/32888052693.html?spm=a2g0s.9042311.0.0.321663c0lHY0FI has lights that are 12v, so we will connect them in series since the printer's power source is 24v. To install the supports, remove the lower front screws from the axles and place them sideways into existing holes, then place the supports into vacant holes. I have drilled a hole in the front to install a new switch that I purchased from https://es.aliexpress.com/item/32970052208.html?spm=a2g0s.9042311.0.0.59a463c0O7iLrv. The internal LED of the switch works perfectly at 24v, making all electrical connections direct and simple, using a free output from the printer's power source. I hope this helps you, I also upload the design in FreeCad if you want to modify or improve it. I have added a STL version raised with the purpose of uploading the light a little higher since I think it is a bit low and does not illuminate well the bed. Also, I add the modified project in FreeCad. Greetings.