IKEA SKÅDIS / SKADIS Jam Jar Holder

prusaprinters

With this model you can hang marmalade glass jars from the “Bonne Maman” brand from your IKEA SKÅDIS board. Specifically, this holder is made for the Bonne Maman marmalade jars whose lid has a diameter of 85 mm. This brand is popular in France, but you may find it in different countries also. It has a tight fit with the board and won't wiggle around or come loose easily. It can also hold a fair bit of weight: I have put about 500 grams of nails into one jar and have not observed any droop of the holder after a week.Print instructionsI printed with PLA. You may get a stronger result with a different material, like PETG.Layer height of 0.2 mm was good, since there are no fine details. I used the standard 0.4 mm nozzle. Maybe you can print a bit quicker with a larger diameter nozzle.I disabled all supports - the model is designed such that you should not need any if it is printed upside down (the opening that will accept the glass jar is printed first).The strength will depend on how many perimeters you print, and the infill. I am printing with 2 perimeters, and 30% Cubic infill. There may be potential for optimisation here.