IKEA SKORVA Slat Retainer Clip

thingiverse

I needed some clips to retain the slats when going from a single span full bed to a double span using the SKORVA center beam. You will need 2 of these clips, as you will use one at each end of the center beam. the hole spacing is 16mm and 20mm, so make sure you align it correctly and use a soft tap with a hammer to seat the clips in. I used 25% infill for the first 7-8 mm and 80mm for the remainder to give the pins a bit more strength. PETG is recommended for resiliency. Part should be printed with the pins point up from the bed.