IKEA Sigfinn simple phone stand
prusaprinters
<p>I wanted to practice using Fusion 360 so I tried to measure and model an IKEA Sigfinn as an exercise. Here are the fruits of my labor!</p><p> </p><p>This simple phone stand is universal and will probably fit pretty much every phone. It features a little hole where the phone rests so that it can be charged while being on the stand. </p><p> </p><p><strong>For MINI(+) users:</strong> as a fellow owner of a MINI I could not print the full-sized version so I made an 80% version as well.</p><p> </p><p>Layer height: 0.2mm</p><p>Supports: Yes (for angles under 40 degrees)</p><p>Infill: 10%</p><p>Material: PLA, PETG, anything non-flexible</p><p> </p><p><strong>NOTE:</strong> As the original long part of the Sigfinn is curved on both sides it was impossible to put it flat on the build plate. I flattened it (without sacrificing any functionality) for easier printing. </p>
With this file you will be able to print IKEA Sigfinn simple phone stand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on IKEA Sigfinn simple phone stand.