Ikea Samla Filament Dry and Storage Box To Print From

prusaprinters

<p>The dry boxes i found so far did not fit my needs. So here is my take on that.</p><p>With this box it is possible to print directly from it. To lower the friction for non perfect angles to the printer i integrated a filament guide with MR73ZZ bearings.</p><p>The parts that gets screwed to the walls have an angle to take account for the scewed walls of the samla box.</p><p>The filament holder is designed to hold a M8 rod. It uses F8-16M axial bearings. Take a look at the "remixed from".</p><p>The top gets clamped to the box with window seal. To factor in the seal i remixed the samla clips from @Wookbert.</p><p>You'll need:</p><ul><li>a Ikea Samla box, i use 45l</li><li>for 6 spools that fit in the 45l size: 24 MR73ZZ, 12 F8-16M</li><li>M8 threaded rod, 2* ~38cm</li><li>filament teflon tube</li><li>printed parts</li><li>20 M5 screws, 12mm length</li><li>20 M5 nuts</li></ul><p>optional: silica gel If you have the problem that the M8 rod is turned if you pull a spool, then use some nuts to prevent that (see photo).</p><p>Of course you can use any other spool holder inside the box.</p><p>I am using this on a nearly daily basis and i am very happy with it.</p><p>(Imported from https://www.thingiverse.com/thing:4179304)</p>