IKEA Lack MMU/MMU2S Extension for Prusa i3 Printers
thingiverse
Changes: 2020-02-27: Simplified FilamentFeeder_Top for easier 3D printing. After building my "Original Prusa i3 MK3 ENCLOSURE" on an Ikea Lack table, I purchased a MMU2s for my Prusa i3 MK3S but did not want to change the enclosure. So, I designed this IKEA Lack MMU extension to access my MMU and feed tubes from filament spool holders directly to the printer. I highly recommend using these spool holders (https://www.thingiverse.com/thing:3228827) because they allow you to eliminate the original filament buffer, which requires a lot of space. WARNING: I tested this extension on Prusa i3 MK3S and MMU2s, but other models might need customization. Please inform me if these are necessary for your printer or mmu setup. Build Instructions: - Build up your Ikea Lack enclosure (https://www.thingiverse.com/thing:2864118) with two or three Ikea Lack tables; I recommend using three. - Cut two holes (40x260mm & 195x150mm) in the table surface as seen in the second screenshot. You will need a saw with a blade length of 50mm or above. - Print the parts included here and click them together; you may want to fix them a bit using some glue. - Place your Original Prusa Printer with the MMU on top, below the plate where you added the parts from this thing. - Place your spool holders and connect them to the MMU. - Enjoy access to your MMU and happy printing.
With this file you will be able to print IKEA Lack MMU/MMU2S Extension for Prusa i3 Printers with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on IKEA Lack MMU/MMU2S Extension for Prusa i3 Printers.