IKEA FNITTRIG 24cm Semi-hydro Insert

thingiverse

Semi-hydro base insert for [24cm IKEA FNITTRIG](https://www.ikea.com/sg/en/p/fnittrig-plant-pot-in-outdoor-blue-grey-60479531/). Fill pipe hole is for 20mm OD PVC pipe (seems to be commonly available in Singapore, probably a standard metric pipe size?). Water level indicator hole is for [this water level indicator from Amazon](https://www.amazon.com/dp/B08DG27VKS/ref=cm_sw_su_dp); I had to trim 70mm off the pipe and indicator to get a perfect height for the pot. Sized for a 250mm x 210mm (x, y) bed - specifically the Prusa i3 MK3S that I have. **Print Settings: Skirt and brim: Loops (minimum): must be set to 0, in order for the print toolpath fit in build plate.** Print upside down relative to STL file as-is (disc side down). For heavier plants/future-proofing, use 100% infill; probably a good idea not to have air gaps too to discourage water retention and bacterial growth. In order to fit into a 210mm bed constraint, the round edges are slightly cut off, so finer media (fine gravel, sand, mixed soils) may slip through the gap, but ≥8mm LECA balls should be perfect and not spill into the reservoir. Update 2021-05-29: Increase wick hole thickness to 2mm for rigidity. Changed water level indicator hole to 16.20mm to fit linked product. Changed UPVC fill pipe hole to 20mm to match [commonly available 20mm OD electrical UPVC conduit in Singapore](https://www.lazada.sg/products/upvc-pipe-black-202900mm-252900mm-322900mm-i1644664640-s7734278424.html). Updatee 2021-06-09: Uploaded 2 versions - 69mm depth (original) and 64mm depth. I found my local IKEA to have different manufacturing tolerances and I needed a 64mm depth version, as the 69mm depth version had too large of a gap.