IKEA Dioder LED bar locking clips

youmagine

The clips comprise a top hanger and lower angled clip that enable light to shine efficiently on the build platform just under the moving axis blocks, providing the most direct light. Each clip is held together with an M3 10mm bolt and nut (I had plenty left over from my UM build) or simply substitute with a 3mm wide zip-tie. The assembled clip hangs from the top of your bot and locks underneath, ensuring the bar is held securely all the while not damaging your bot's frame nor requiring you to place adhesives that will fail over time nor drilling additional holes in your body. Demo video: http://goo.gl/pc3jGJ Instructions: Get some Dioder LED bars from your local IKEA or buy them online: - White: http://www.ikea.com/us/en/catalog/products/20119418/ - Multi color: http://www.ikea.com/us/en/catalog/products/50192365/ Print 6 LEDClipA.stl and 6 LEDClipB.stl Push a 3mm nut into B part Screw an M3 10mm bolt into the front of B part, which pulls the nut into B part Un-screw the M3 10mm bolt from part B Match part A and B Screw the M3 10mm bolt through part A into B, leaving slack Hang part A on the frame Spin part B horizontal to pass the frame Spin part B vertical, creating a rail lock Check the location of part B in relation to axis slide blocks (make sure you keep clear of the end-stop sensors) Tighten the M3 10mm bolt into the nut, locking position Snap the Dioder Bar into part B's pinch arm Run your power cords down the inner frame Mount the Dioder inverter to the bottom of the bot Zip-tie leads together along with an extra 4th LED bar for Ultimaker logo light-up display! Enjoy your new well-lit build platform!