IKEA Bror - Sheet Holder with Drawers

prusaprinters

The IKEA Bror is a great utility cart to use with 1 or 2 MK3S's. With the storage opportunities under the cart and the two shelfs, I designed a simple solution to store 5 sheets and have some drawers for storage (allen wrenches, screw drivers, etc). Print the following parts and quantities:Divider-Left: 1Divider-Right: 1Divider-Center: 1SheetHolder: 2SheetHolder-Peg: 4Right_Drawer: 1Left_Drawer_Bottom: 1Left_Drawer_Top: 1JointBlock: 2The assembly and installation should be pretty self explanatory. Use the SheetHolder-Peg's to connect the SheetHolder to the Left and Right Dividers (I used Gorilla Glue…but any glue will probably work). I had some slight warpage of the Left and Right dividers and them not staying flat on the print bed. I used clamps to provide some pressure with connecting and gluing the SheetHolders to the Dividers. If you can get the Dividers to print flat and not warp off the bed during the print, then great!Use the JointBlocks to connect the Left and Right Dividers to the Center Divider. You obviously do not need these if you want to be precise with the drilling and spacing of the dividers. Was just an easy way to ensure the correct distance between everything.  Once assembled, screw in on the underside of the IKEA Bror plywood top (recommend taking the plywood off the Bror and flipping upside down).  Word of caution, make sure the Dividers are completely smooth on top where its suppose to be flush against the plywood (might want to sand it slight for any 3D print layer bumpnyess). Also make sure the screws are as straight and tight as they can be so the sides do not move and/or sit on an angle. I am attaching the STEP file of the design as well.Enjoy!