Igloo mono amplifier

myminifactory

This case for the Kitronic Mono Amplifier takes its cue from an igloo's design. To assemble, follow these steps: 1. Place the amplifier on the ring nut (ghiera.stl) and secure it firmly, then attach the assembly to the dome (calotta.stl) using three 2.9x12.7 mm self-tapping screws. 2. Connect the two amplifier wires to the PCB and fasten the PCB to the base (base.stl), utilizing screws and spacers as described in the mounting instructions. 3. Secure the 9V battery clip to the PCB, then place it in position by aligning with the rectangular slot on the base. 4. Route the jack lead through the small hole on the side of the dome and solder it securely to the PCB. 5. Attach the base to the dome using three 2.9x12.7 mm self-tapping screws. 6. Connect the 9V battery and close the battery door.