iFlight Titan H3 HD - TPU parts 3/3

thingiverse

These parts can be used to upgrade your iFlight Titan H3 HD quadcopter as shown on my Youtube channel in the video "iFlight Titan H3 Air Unit Holder & Stealth Casing": https://youtube.com/playlist?list=PLV5QdQcHp6qxqEmsnE5NONOSlV6sBeDkm Description of the parts: DJI Air Unit Holder 2.1 g This DJI Air Unit holder has an integrated grommet (like a pocket) for the DJI antenna. The antenna cable is guided directly upwards (unlike iFlight conceived it) and therefore the antennas stick out more what gives them better transmission. An other integrated feature in the this Air Unit Holder is a battery straps stopper. In case of a crash, the straps can not slide to the front. This reduces the risk that the battery is unplugged in a crash. Like on the original iFlight Titan H3 HD Air Unit holder, an M2 nut is used to mount the holder to the top plate in the back. Howsoever - it is recommended to use a M2 nut out of steel. Stealth Casing 2.88 g It is made to protect the electronics and fits exactly around my DJI Air Unit Holder. It can be mounted or removed without touching any screws. Don't forget to print one side mirrored ;-) Important note to the casing: So far I had no overheating when the casing was on. But the weather was still cold. I think the DJI Air Unit could overheat in summer - especially if you let it sit on the ground in the sun while the battery is plugged in - to wait until the GPS has enough satellites for example. The Air Unit would for sure overheat, if the casing is on while updating the firmware. So please don't forget to take the casing off - or at least one side, if you do those things! Balancer Cover 4S 0.6 g & 3S 0.5 g This covers protect a 3S or 4S battery balancer plug. The two studs on the cover can be put into the openings in the H3 top plate what prevents the plug to move around or cause vibrations. USB-C Cover 0.12 g Can be used to plug the USB-C of the DJI Air Unit. Part 1/3 of my iFlight Titan H3 3d printable parts can be found here: https://www.thingiverse.com/thing:4721906 Part 2/3 of my iFlight Titan H3 3d printable parts can be found here: https://www.thingiverse.com/thing:4730952