iFlight Protek 35 Propguard

thingiverse

!!!UPDATE!!! I added a V3 with holes along the outside of the guard, as per request. I do not take credit for the V3 design. I created these propguards because I wanted some to mess up while i'm learning. I couldn't find a model available so I did my best to recreate them from the original. I made 3 versions. The first are a little to boxy for my liking so I made the V2 that look a little more like the original. The 3rd version are round whoop style propguard. For easy installation of the round whoop guard, install the blade into the propguard before installing the set-up to the quad. The props on the round whoops are encased on top and bottom. I included as much of the profile I used as i could. I hope it works well for you. The pre-made profiles should be good enough, but this is what I use with Inland (Micro Center) PETG. Sorry I did not fix the orientation of the model. Each propguard was weighed in whole grams at 40 grams The stock guards were weighed at the same time at 39 grams I used Simplify 3D to slice the model Sorry I did not fix the orientation of the model. Flip the model +90 degrees on X rotation, then flip 90 degrees on Z rotation I am not asking for donations but have had a couple people ask if the could leave a donation. If you would like to buy me a coffee I have left a link below. Thank you for the interest in this project, it has been great fun. We'll see what other parts I will find to make or customize. Feel free to send me suggestions and I will see what I can do. I sourced hardware based on what I thought was needed, so if you find parts cheaper, or in less quantity, more power to ya. I included the Amazon links to what I used. Donation Link: https://paypal.me/dmerrill82?locale.x=en_US Parts List M2.5 Brass Insert, 4.5 mm (Length) - https://www.amazon.com/gp/product/B07HKT5W7S/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 M2.5x6mm Thread Button Head Hex Socket Cap Screw - https://www.amazon.com/gp/product/B01B1PGR22/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1