Ideal Standard Conceala 2 dual flush repair parts Updated!

pinshape

This is a fix for repairing the back of two flush button pumps that broke off from the faceplate, leaving the mechanism exposed behind. It's a long shot that anyone might need this solution, but since the work has already been done, here it is for reference. To repair the pumps, simply pull off the thin plastic pipe connected to the button assembly leading to the plumbing system. Be careful not to lose the pipe in the wall. Next, insert the button assembly into the repair part and assemble everything as shown in the picture. I used superglue to hold it together, and it seems to be working fine so far. It's best to start assembling first before applying a few small drops of glue around the join. Once everything is assembled, reconnect the pipe to the back of the button assembly and refit it to the wall. This repair requires some time to print, depending on the layer height and infill settings used. With a 0.2mm layer height, 100% infill, and printing at normal speed, it takes around 1 hour and 30 minutes to print the smaller pump. The larger one may take about 2 hours and 5 minutes. For the larger pump, use support material or the overhang will fail during printing.