i3 PSU cabinet bracket

thingiverse

This is a tested solution for mounting standard i3 Mk3 (Prusa and clones) PSUs on the wall. It also makes it easy to disconnect the PSU for maintenance by equipping the power cables with XT-60 connectors. I had trouble finding a good solution to move the PSU outside the IKEA Stuva cabinet, so I created my own. I've modified the original Prusa PSU housing to incorporate those connectors. There's not much room inside but it will work. **CAUTION!** This mod requires you to solder connectors for 24V cables powering the printer. Make sure you know what you're doing because errors might lead to serious accidents. This design was inspired by https://www.thingiverse.com/thing:4087876 and discussion on Fb Prusa i3 Bear Upgrade group. You will need: - 2x XT-60E-M mountable connectors - 2x XT-60 plugs - 1x mini-jack mountable socket and plug for power panic cable - 3x M4x8 flathead screws PSU bracket - 2x M5 flathead screws for the wall bracket Here's a video on how to solder those connectors. I've used the original printer wires cut to length. Make sure to leave enough cable inside the housing to be able to comfortably detach the lid with connectors from the PSU. [1]:https://www.youtube.com/watch?v=L19amVtmP2c