i3 MK3S+ Printable parts

prusaprinters

<p>All printable parts for your Original Prusa i3 MK3S+<br>Sorted by <a href="http://help.prusa3d.com/en/category/original-prusa-i3-mk3s-kit-assembly_1128">kit assembly manual</a> chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.<br><br>Attention, <strong>y-rod-holder</strong> is present 4 times in the printer. If you plan to print the whole kit, print this part 4x. Look for a number in the brackets in the file description.</p><h3><br><br><strong>Print instructions</strong></h3><p>PrusaSlicer's default PETG 0.2mm presets.<br><br>For <strong>fan-shroud</strong> part, we recommend Prusament ASA / PC-Blend with default settings and 5mm brim if necessary.<br>The fan-shroud STL file includes an inner support rim that needs to be removed after printing. It can be easily removed with needle-nose pliers, a knife, or flush cutters together with the brim. Otherwise, it will block most of the air from coming out. See the <a href="https://help.prusa3d.com/en/guide/5-e-axis-assembly_169235#171071">corresponding assembly manual chapter</a> to see what the part should look like after removing the inner support.&nbsp;<br>ASA, PC Blend, PA or even ABS, as well as other high-temperature materials are only suitable for experienced users, and being from different manufacturers, its properties may vary greatly.<br>PLA or PET-G is a no-go for<strong> fan-shroud </strong>because of its low temperature resistance.&nbsp;<br><br>We recommend using black filament to print all MK3S+ extruder parts. If you want different colour, you can use it, but the <strong>FS-lever</strong> part should be definitely dark (black) and the other parts surrounding the IR-Sensor as well. In case you use any lighter colour for the<strong> FS-lever </strong>it might not trigger the sensor.<br>&nbsp;</p>