Hyundai I10 2021 Wireless Charger

prusaprinters

<p>I wanted to add a seamless wireless charger for my Hyundai I10 - so I designed one to replace the center console tray.</p><p>To install remove the center console by gently prying at the perimeter of the console to release the clips, and then do the same thing (using a plastic prying tool may help) to the gear shifter plastic trim. Once all the clips are free remove the center console, and then remove the 4 screws holding the tray in place. Install printed replacement, and return screws (be careful not to overtighten the screws while installing them - they are self tapping screws into plastic).</p><p>Then simply install the console with gentle force to relatch all of the clips (route the cable from the wireless charger through the small slit in the printed part).</p><p>&nbsp;</p><p>Print in model orientation, with supports from build plate only.</p><p>Print in ABS (or other heat resistant plastic) as the car can get pretty hot.</p><p>After printing I added a dBrand sticker I had lying around for asthetics.</p>