Hyundai accent '95 sunshade replacement clip

thingiverse

This is a JSON object that appears to be a configuration file for a 3D printing tool, likely Cura or a similar software. It contains numerous settings and parameters for the printing process. Here's a breakdown of some of the key sections and values: **Printing Settings** * `layerHeight`: The height of each layer in the print (0.2 mm). * `maxLayerDuration`: The maximum time allowed for a single layer to be printed (5 seconds). * `minLayerHeight`: The minimum height of a layer (0.01 mm). **Infill Settings** * `infillOrientationInterval`: The interval at which infill layers are oriented (90 degrees). * `infillShellSpacingMultiplier`: A multiplier applied to the shell spacing for infill layers (0.55). * `sparseInfillPattern`: The pattern used for sparse infill layers ("linear"). **Raft Settings** * `raftBaseThickness`: The thickness of the raft base layer (0.3 mm). * `raftInterfaceAngle`: The angle at which the raft interface is printed (45 degrees). * `raftSurfaceLayers`: The number of surface layers in the raft (2). **Support Settings** * `supportDensity`: The density of support material used for overhangs and bridges (20%). * `supportExcessive`: A flag indicating whether excessive support material should be generated (false). * `supportExtraDistance`: The distance beyond which support material is not generated (0.5 mm). **Travel Speed** * `travelSpeedXY`: The speed at which the print head moves in the XY plane (100 mm/s). * `travelSpeedZ`: The speed at which the print head moves along the Z axis (23 mm/s). **Miscellaneous Settings** * `purgeBucketSide`: The side of the purge bucket (4.0). * `raftOutset`: The distance from the model to the raft (4.0). * `roofSolidThickness`: The thickness of the roof solid layer (0 mm). This is just a small sample of the many settings and parameters available in this configuration file. If you have specific questions or need help with a particular setting, feel free to ask!