Hyperlite Floss 3.0 fixed camera mount with extra protection, 40 - 75 degrees
thingiverse
This is a light minimalistic fixed camera mount for Runcam Racer cameras and similar models, boasting an outer lens diameter of 12 mm. With a fixed mount, you can be certain all your quads have the same camera up-tilt angle. The mount necessitates an additional component: a 35 mm long knurled aluminum standoff that can be found in Martian 2 frame kits. Features and ideas: * A crossbar that transfers impact energy to the frame standoffs, delivering less shock to the camera. * A somewhat bendable part that holds the camera allows for a little give if something hits the camera despite the protection in front. * Weighs only 2.9 grams with the crossbar (for a 60° mount). * Fits on frames with front standoffs 31 mm apart - Hyperlite Floss 2, 2.1, 3.0. * Camera angle is embossed on the mount, so you can print different ones and exchange them without guessing which is which. * Sufficient clearance to run 5.1" propellers (tested with Gemfan 5149.9, Gemfan 5146.6, T-Motor 5143). If you print one, please consider posting a make. I enjoy seeing things I designed in action. Check out other Hyperlite Floss 3.0 accessories I made: * [Turtle mode fin that requires no hardware for mounting](https://www.thingiverse.com/thing:3781009) * [Neat RX antenna mounts](https://www.thingiverse.com/thing:3784756) * [Lumenier Micro AXII mount](https://www.thingiverse.com/thing:3768286)
With this file you will be able to print Hyperlite Floss 3.0 fixed camera mount with extra protection, 40 - 75 degrees with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Hyperlite Floss 3.0 fixed camera mount with extra protection, 40 - 75 degrees.