HyperCube X Carriage with Autobed Leveling-Optical Z Probe

thingiverse

You need a 77mm allen key or similar 1.5mm steel rod and a 10x20x2mm earth magnet for autolevel probe. Probe offsets are: X_PROBE_OFFSET_FROM_EXTRUDER 19 Y_PROBE_OFFSET_FROM_EXTRUDER -2 BOM: As Optical EndStop I have used this one: https://www.aliexpress.com/item/6pcs-lot-Free-Shipping-Optical-Endstop-Light-Control-Limit-Optical-Switch-for-3D-Printers-RAMPS-1/32245549123.html Heating Block: https://www.aliexpress.com/item/10Pcs-Reprap-Makerbot-MK7-MK8-Aluminium-Heater-Block-For-Print-Head-Hot-End-Heating-Block-20/32633806200.html Nozzle: https://www.aliexpress.com/item/1-pcs-0-4mm-0-3mm-0-2mm-3D-printer-extruder-nozzle-Print-head-MK8-Makerbot/32434013783.html Throat (I have used all metal, it is up to you): https://www.aliexpress.com/item/5pcs-Stainless-Steel-E3D-V6-Heat-Break-Hotend-Throat-for-1-75-mm-3-00mm-Filament/32656161183.html Magnet: https://www.aliexpress.com/item/10pcs-Lot-Strong-Block-Cuboid-Fridge-Magnets-Rare-Earth-Neodymium-20x10x2-mm/32729355401.html In action: https://youtu.be/5Fln4nKIfVA First layer print after leveling: https://youtu.be/c03UmInddeQ Z PROBE REPEATABILITY TEST RESULTS: Range: 0.007, Standard Deviation: 0.002358 (See Picture). NOTES: * For the part "Coolers", set the extrusion width to 0.4mm manually. Otherwise it will be printed as one single wall which will probably have defects and holes on it. * All parts can be printed without support. In "Z-Probe" part there is a small integrated support, you should remove it after printing. * Z_MIN_ENDSTOP_INVERTING should be "true". * FIX_MOUNTED_PROBE should be activated. * Find your Z_PROBE_OFFSET_FROM_EXTRUDER value according to your hotend height (Mine is -6).