Hypercube Prusa i3 MK2 Direct Drive Extruder

thingiverse

Print this in ABS because it's extremely close to the hotend. PLA will be too weak - PETG might work but hasn't been tested yet! Everything you need except for the pulley can be reused from the hypercube build. You'll need: 9 M3 nuts 6 M3 x 10 screws 4 M3 x 35 screws 4 M3 x 30 screws 1 M3 x 20 screw 4 M4 nuts (used to hold springs in place) 2 springs (you can take them from ballpoint pens) 1 M8 pulley (available at Mk8 Gearbest: https://www.gearbest.com/3d-printer-parts/pp_226202.html?lkid=11453766) 1 625Z idler bearing 1 12 mm sensor Original E3Dv6 Hotend Time to print this is unknown. This only includes the Extruder Body, Extruder Cover and the Idler Pin. The Fan Shroud and Idler can be reused from the Original Prusa i3 Files. You can find them here: http://www.prusa3d.com/prusa-i3-printable-parts/ You'll need to move one of your extrusions in the front downwards to access the whole printbed. Further information is available at: https://www.youtube.com/watch?v=Qn37TAT7aXY