Hypercube Evolution Reinforced Bed Mode

thingiverse

Original Hypercube Evolution bed design is good but has too much printed parts and the margin error gets bigger with time. I made an alternative by using a different design. ****************************************************************************************************** BOM: - 4 X LMK12LUU Square Flange Linear Bearings Link: https://www.aliexpress.com/item/32815741633.html?spm=a2g0s.9042311.0.0.2742b90aQeBMJw - 2 X Lead Screw POM nut Link: https://www.aliexpress.com/item/32825317686.html?spm=a2g0s.9042311.0.0.2742b90aBBxDNt DON'T USE THE BRASS ones. - 18 X M5x10mm Screw (To fix the metal plates) - 16 X M4x10mm Screw (To fix the Linear Bearings) - 4 X M3x10mm Screw (To fix the Lead Screw POM nut) - 2 X 2020 Aluminium Profile 415mm (The existing profiles can be used) - 3 X 2020 Aluminium Profile 255mm (The existing profiles can be used) - 7 X 2020 Corner Angle L Brackets Connectors. LINK: https://www.aliexpress.com/item/4000767697780.html?spm=a2g0o.productlist.0.0.1bb15a5bsU7ybm&algo_pvid=f753b830-fd37-43d8-a6f9-8ffc62a8b72e&algo_exp_id=f753b830-fd37-43d8-a6f9-8ffc62a8b72e-8 - 4-7 X 2020 Corner Angle L Brackets Connectors, in order to fil the build plate. Things to Print: - 2X Z Axis Up Linear Rail Bracket Left - 2X Z Axis Up Linear Rail Bracket Right - 4X ​Z Axis Down Linear Rail Bracket 1-2 - 4X ​Z Axis Down Linear Rail Bracket 2-2 - 4-7X Z Build Plate Supports, must be combined with the 2020 Corner Angle L Brackets Connectors Things to Cut: 2X Reenforced aluminium with 5mm thickness **************************************************************************************************** Important: One big modification was as well the linear guides supports, now you will gain some space on X-axis. Added a new Z Axis Linear Rail Bracket as well, so be sure you will aligned them well. You can use the same rails as the original Hypercube Project