Hypercube Evolution Phisto hotend assembly

prusaprinters

<p>This is my new and improved version of my Hypercube Evolution hotend assembly, called the "Phisto" (<strong>Phi</strong>losopher's <strong>Sto</strong>ne), named that because it turns plastic into gold ;P</p><p>&nbsp;</p><p>I use a knockoff Mosquito High Flow hotend, a Trianglelab Orbiter V2, a BLTouch, 2 5015 Blower fans and a small 25mm fan for the hotend.</p><p>It is a bit wider than an original Hotend assembly for the Hevo, but it should still fit and work the same.</p><p>&nbsp;</p><p>The parts don't need much support, the main body and the fan duct just need supports on build plate the way I oriented them in the files.</p><p>All the parts are printed at 0.2mm layers with 4 Walls and 50% infill. Everything is printed in ABS, very important especially for the Fan duct!</p><p>Speaking of the Fan duct, that is held in place using 4 6x1mm round magnets for easy access.</p><p>Mostly everything else is held in place by m3 and m4 heatmelt inserts, specifically m3 4x3mm, m3 5x5mm, and m4 6.5x6.5mm.</p>