Hypercube Evolution Mount for Bondtech BMG Direct Extruder and Orion Piezo with E3d V6

thingiverse

This is my self-designed Mount that combines the famous Precision Orion Piezo with a BMG direct Extruder. The suitable X-Carriage can be found here: https://www.thingiverse.com/download:4272418 Heatsink clamp also here:https://www.thingiverse.com/download:5388975 The assembly is a bit tricky - see photos. 1. First, place the backside of the BMG in position. 2. Insert the tube guide into its proper placement between the back part of the BMG and the carriage. 3. Mount the hotend clamp and Piezo with four M3 screws. 4. Tighten the screws on the wall side. 5. Insert the PTFE tube, then mount the front side of the BMG and stepper motor together. 6. Tighten all three screws to secure the BMG. The stepper motor can be found here: https://www.omc-stepperonline.com/de/nema-17-42mm-schrittmotor/nema-17-bipolar-1-8deg-13ncm-18-4oz-in-1a-3-5v-42x42x20mm-4-drahte.html If you wish, place small heatsinks on the stepper motor. It will get quite hot (about 45 degrees). Issues: You need three millimeter longer screws to mount the BMG. Get forty millimeter M3 screws and cut them to the right lengths. Feel free to remix and comment.