Hydroponic Bell Siphon

thingiverse

This Siphon Assembly was crafted to fit snugly into a compact storage container under your bed. The rockwool baskets are strategically placed within cutouts in the lid, while the shipon should be installed at the bottom for optimal outlet alignment. The standard outlet hole is designed to accommodate an ordinary garden hose pipe, effortlessly connecting it to your water tank for expanded delivery. Moreover, a snorkel outlet can be lengthened using a 5mm tubing piece to adapt to varying water levels. To fine-tune the top water level, simply push the outlet hose pipe through and into the bell siphon chamber. With an extra base print and nut combination, the water supply to your container is effectively managed. Printer settings are specified below. Printer: ctc 3d Rafts: Don't bother with rafts Supports: Include them Resolution: Use a minimum of 0.2 Infill: Set at 10 Notes: You can print this using either ABS or PLA material. First, print the top base on its own and then assemble it with the siphon base containing the screw element on your printer base.