Hydra Single & Multi Headphone Holder

thingiverse

This is a headphone stand, 100% printed parts. Okay not 100%, if you need to wall mount it the french cleats accept screws or double stick tape.All in it really only uses like.. 300g of filament for the single version, and with some puzzle skills it can all be printed on a single 256x256 build plate.Usage InstructionsPress the Marquee to release the joint and rotate for both the Arm and the HolderPlace headphones on the standAdmire the sheer beauty of industrial design and over-engineeringAssembly Instructions:If you love yourself, don't use internal supports. Touching build-plate only (except on the springs, the need all the support they can get. I suggest trees.)If you use the wall base, just print the wall base and two cleats.Don't put the marquees in before it tells you to.. they go in very tight. Print the parts needed off the BOM belowInsure threads on the Cap and Bolt are clean (may need a tapping/die tool if printed in PETG)Insert the key into the Holder and press it into the keyway (chamfer facing the outside of the tube)Insert the top of the Arm into the back of the HolderInsert the Bolt through the back of the Arm into the HolderInsert the Spring into the front of the HolderUse the Tool to screw the Cap onto the end of the Bolt, through the front of the HolderRepeat the above steps, but with the Base Tube instead of the HolderPlace the assembled unit on a solid surface with the Caps facing up, and press the Marquees into the Caps (these are disposable if removed, purely an aesthetic part)Press the assembled unit into the BaseFor the Wall mounted version, mount the cleats 150mm apart to the wall.BOM Single:Bolt x2Cap x2Key x2Spring x2Marquee x2Holder x1Base Tube x1Arm x1Single Base x1Tool x1BOM Double:Bolt x4Cap x4Key x4Spring x4Marquee x4Holder x2Base Tube x2Arm x2Double Base x1Tool x1BOM Hydra (Triple):Bolt x6Cap x6Key x6Spring x6Marquee x6Holder x3Base Tube x3Arm x3Hydra (Triple) Base x1Tool x1If for whatever reason you need a base that can hold more headphones, or plan on displaying this model and would like the marquee or logos removed/changed, please contact me :)