Hydra Fan Duct & Tool Change System for CR10S PRO with MicroSwiss Hotend (REMIX)

thingiverse

<strong> THIS IS A WORK IN PROGRESS AND NOT YET TESTED</strong> This is a remix of BoothyBoothy's awesome Hydra Fan Duct, and is designed for the CR10S Pro V1 (which is what I have), with a MicroSwiss Hotend. I have printed several prototypes of this design but have not yet tested this due to a seemingly constant stream of new projects and not enough time (but I will update this when I do test it). For now, if you do print this, it is at your own risk, however feedback is welcome. <strong> This was designed with the additional help of the following:</strong> The 3D model of the CR10S Pro x-gantry by <strong> PolygonHell</strong> who posted it here (https://a360.co/2BOAdnS). <strong> Ookamii's </strong> Heatfixer to fit the taller MicroSwiss Hot end I use on my CR10S Pro (https://www.thingiverse.com/thing:4457658). Once Thingiverse fixes the ability to add multiple remix sources I will add this as a source. I designed this to use a front mounted inductive probe similar to the EZABL (18mm diameter). I also designed a side mounted bracket for it, however I felt the offset was too far out so did not test print it and am not including it here. <strong>I did not include the files for the fan ducts, or the extruder mounts, please get them from the original Hydra design linked below.</strong> The fans I am using are 5010 fans. https://www.thingiverse.com/thing:4062242 This uses M3 screws and locknuts as the original. It will require mostly M3x10mm screws but two M3x16mm screws will be necessary if using a direct drive extruder. I will update the description here when everything is tested. Parts are not oriented for printing (see the pics for a suggested orientation). Supports are optional, though I did use them on the fan guard and the Cable Management bracket. I used the following settings when printing the test parts: 0.16 layer height 50% infill (gyroid) 3 walls I used PETG for the fan guard, and the heatfixer, as well as the extruder mount and the fan ducts. I used PLA on the other parts. STEP file included for easy remixing. This was designed using ViaCAD V12 Pro.