Huvud - EBB42 - LDO Orbiter 2.0 EVA 3.x mount with strain relief

prusaprinters

1/25/23 - Added a second version where the top strain relief is removed and zip tie holes are added to the left side. I found it more stable when securing the cable on the side removing the flex that was present in the upper part of the mount when the cable was attached there. I remixed this to allow Huvud or EBB42 boards to me mounted. I used M3x8 screws for mounting the board to the part. Those screws will self tap themselves and hold very tight. I've also shortened the height of the strain relief section and added a 1mm hole in the top for inserting piano wire that can be used to support the cable. I used M3 x 20mm standoffs to connect the part to the two bolt points on the Orbiter motor. Sorry, I didn't have them in when I took the photo. \_(ツ)_/