Husqvarna Automower Wing

thingiverse

This wing was designed to increase overall speed and efficiency of the Husqvarna Automower. Since attaching it, my mower corners faster and better, has extreme downforce in the back for exceptional traction, and has easily taken 15% off lap times while cutting the lawn! I've uploaded a few options: - The complete 13" wing for anyone with a really big printer, or if you prefer to split up your own. - Two that are done in halves. One with 3.25mm holes and one with 2.0mm holes. These are so you can super glue the halves together, and use either 3mm filament, or 1.75mm filament as joining dowels. Be sure to mirror the model when you print the other side. - The support is not a symmetrical piece (for aesthetic reasons), so also mirror a 2nd one when printing. I have also uploaded them as a pair, but not in a print friendly way, more as a reference. I cleaned the print up a little bit, especially at the seam of the two halves, with a little bondo and some spray paint. I'm not great at paint or body work, so it's not the greatest if you look too closely. Feel free to do a better job than I did. Apply decals as you see fit :D For assembly, I used a soldering iron to press threaded inserts into the support brackets. I used M3x6 inserts for the wing attachment, and M4x6 inserts for the frame attachment. I used M3x12 button heads to attach the wing to the supports, and M4x12 allen bolts to attach the supports to the Automower. This requires drilling a few small holes in the back of the mower. If you're not down for that, feel free to attach it however you see fit. See the wing in action here!!! https://youtu.be/myUuVJL1Y-0 If this design is worth anything to you, feel free to Paypal me a beer, even a cheap one ;) LordFly88@hotmail.com Thanks!