Hulk Coaster (Dual extrusion)

thingiverse

This is a dual extrusion Hulk coaster. Just add both files and print it. I printed at .15mm layer height and 30% infill, and it turned out near perfect. Print Settings: Resolution: .15 Infill: 30 Notes: For anyone using the FlashForge Creator Pro and Simplify3D, I use the following script to get much cleaner prints. It adds more time because it lets one side cool down upon tool change, but it's worth it. I printed in ABS, so if you're printing in PLA, you'll have to adjust the temps. Just go to Process Settings, Scripts, Tool Change Script and copy the following: ; Tool change script start G1 X120 Y-70 F4000 ; Move out of the way while it stabilizes active tool temp. {IF NEWTOOL=0}; Right Extruder is active {IF NEWTOOL=0}M104 S160 T1; Cool inactive extruder to 160c (T1) {IF NEWTOOL=0}M104 S230 T0; Heat active extruder to 210c (T0). {IF NEWTOOL=0}M133 T0; Stabilize T0 temperature {IF NEWTOOL=1}; Left Extruder is active {IF NEWTOOL=1}M104 S160 T0; Cool inactive extruder to 160c (T0) {IF NEWTOOL=1}M104 S230 T1; Heat active extruder to 230c (T1). {IF NEWTOOL=1}M133 T1; Stabilize T1 temperature ; Tool change script end