Huion Kamvas Pro 16 VESA Mount for Ergotron/AMZBSCS Arms (may fit other tablets)

thingiverse

UPDATE 01/16/20: I've updated the description to reflect that you should use proper aluminum 90 degree brackets, not printed ones. The included model is for visualization purposes only - in practice, printed ones will crack. I have assembled and tested this project with great success. VESA-compatible monitor mount designed specifically for Huion Kamvas Pro tablets. This size is optimized for the Kamvas Pro 16, but you can adjust the lengths of 2020 extrusion to accommodate all other sizes. This design may also work with Wacom and other model digitizer and display tablets, as long as they are less than 12mm thick (at minimum 10mm). Any thinner than this may still work, but will introduce more play than intended in the design. This mount is designed to attach to a 100x100 VESA specification mounting plate (the further-away holes on your VESA plate). In my specific case, I used it to mount an Amazonbasics not-an-ergotron arm. Printed parts required: -"boot_a.stl" x2 -"boot_b.stl" x2 -"endcap.stl" x4 -"handle_a.stl" x2 -"handle_b.stl" x2 Non-printed parts required: -450mm 2020 extrusion x2 (these need to be the height of your tablet + 100mm) -400mm 2020 extrusion x2 (these need to be the width of your tablet + 50mm) -M4 T-nuts (post-assembly style preferred, avoid using printed ones if possible for strength) x56 -M4x8mm Screws (countersunk heads) x56 -90 degree corner bracket x12 (can get away with 4 if necessary) Optional: -Substitute M4 T-nuts for printed alternatives (not recommended due to low strength). -Substitute endcap.stl for commercially-available ones.