Huge Squirtle Raspberry Pi Case / with Glasses

thingiverse

I added a new model with a glass holder and some glasses as requested. Simply glue the glasses to the model, no modifications are needed for the back part. If you don't want to reprint the front part, just glue the glasses to the model and cut out a small section from the existing model. Have fun! A huge beautiful case is now available for your Raspberry Pi 3b+. To print this amazing model, it will take around 30-40 hours depending on your printer's speed. To start printing, you'll need: * One front part * One back part * Three connectors For assembly, you'll need: * Three bigger screws to hold the back and front parts together * Two small screws for inside the case (to secure the Raspberry Pi) * Some superglue * Every cable (micro usb, hdmi, ethernet, usb) in low profile or space won't be enough Here's a step-by-step guide: 1. Glue the three connectors to either the top or back part of the model. 2. Mount your Raspberry Pi and organize your cables. 3. Attach the front and back parts together using the three screws (you may need to trim the connector slightly). 4. You're done! Now, admire your beautiful work!