HueForge Dragon

prusaprinters

I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:Polylite Black Transmission Distance: 0.3Polylite Azure Blue Transmission Distance: 3Polylite Aqua Blue Transmission Distance: 2.5Polylite Cloud White Transmission Distance: 6Swap Instructions:Black until layer #4 at 0.4mmsAzure Blue until layer #5 at 0.48mmsAqua Blue until layer #12 at 1.04mmsCloud White until layer #17 at 1.44mms The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS. Keep and eye out if your interested in more HueForge models I plan to upload many more.ThanksV2:I made a V2 in red and yellow colors because I wanted to tweak some layer heights and how that you can use any color you want for these models.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA Polylite Black Transmission Distance: 0.3PLA PolyLite Red Transmission Distance: 1.5PLA PolyLite Yellow Transmission Distance: 11PLA Polylite Cloud White Transmission Distance: 6Swap Instructions:Black until layer #4 at 0.4mmRed until layer #7 at 0.64mmYellow until layer #13 at 1.12mmCloud White for the rest.