Hue Play Lightbar Mount Prusa Mini(+)

prusaprinters

<h4>Version 2 over <a href="https://www.prusaprinters.org/prints/112943-hue-play-lightbar-mount-v2-for-prusa-mini">here</a></h4><p>&nbsp;</p><p>Hi,</p><p>this is my first project with 3D-modelling and Fusion360, please be gentle.</p><p>I used the lightbar socket from <a href="https://www.thingiverse.com/myit/designs">myit </a>on thingiverse (<a href="https://www.thingiverse.com/thing:4735701">https://www.thingiverse.com/thing:4735701</a>) to make my life easier.</p><p>The mount works perfect for me and the lighting the lightbar provides is awesome. The mount does sag a bit, which might also be caused by the mounting hole in the lightbar which seems to be at a slight angle. I've included the STEP-file if anyone wants to make some improvements and I'm open for suggestions.</p><h3>You will need:</h3><ul><li>Phillips Hue Play Lightbar (Base-Kit with power supply, an extension kit is not enough)</li><li>the mounting screw that comes with a lightbar (is probably a M2x8 or something like that)</li><li>2x M5x16 Screws (non-countersunk)</li><li>2x M5 Drop-In T-Nuts (whatever fits the 3030 profile. I used some from Amazon, but the forces are not that big, you might also be fine with those: <a href="https://www.prusaprinters.org/prints/64627-3030-m5-drop-in-t-nut)">https://www.prusaprinters.org/prints/64627-3030-m5-drop-in-t-nut)</a></li></ul><h3>Print Instructions:</h3><ul><li>No support or brim</li><li>I used Prusament Jet Black PETG (ASA should also work, PLA would probably creep very quickly, because of the high torsion force)</li><li>0.2 layer height</li><li>25% infill (Gyroid or Cubic)</li><li>4 perimeter</li><li>(I was probably way to cautious, less infill and perimeter is probably fine)</li></ul><h3>&nbsp;</h3>