Hub Bub - Wind Power (2016 Science Olympiad)
prusaprinters
This is a very simple Wind Power wind turbine for the 2016 division C Science Olympiad. It should be fully rules complaint but check dimensions before using this design. The Hub Bub is an easy to attach hub that allows 1/8" wooden dowels to be used to attach fins to the CD. The Super Hub Bub is the same, it just supports 8 dowels instead of 4. Note that you will need a printer able to print thing fairly dimensionally accurate or you will spend a lot of time either gluing or sanding the dowels. The dowels should be firm while in place but still removable. Helpful note, glue to the 'shiny' side of the CD. Note: At time of upload, the design has not been tested in competition and has no guarantee of performance. ==================================================================== Printed Parts needed: 1x Hub Bub -or- 1x Super Hub Bub ==================================================================== Hardware Needed: 1x 1/8" Dowel Rod 48" long 1x Super Glue 1x Standard CD Category: Engineering
With this file you will be able to print Hub Bub - Wind Power (2016 Science Olympiad) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Hub Bub - Wind Power (2016 Science Olympiad).