Htd5mm 16 tooth

thingiverse

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Customized Version of: Thing #16627 from http://www.thingiverse.com/thing:16627 Instructions To Assemble Your Project: Select your preferred settings: * Set the Retainer Height to 1.5 units * Adjust the Pulley Base Height to 14 units * Customize the Pulley Base Diameter as needed (default: 0 units) * Determine the Idler Height at 1.5 units or toggle on/off with idler = 1/0 * Enhance your design by increasing tooth depth by up to additional_tooth_depth = 0 * Add additional tooth width by setting it at maximum allowed amount: .2 Set profile as default or alter if desired; current is set for the optimal setting, ten. Alter Motor Shaft dimensions as preferred; the max input is currently established as fourteen and point two Adjust nut preferences to fit specifications you have set. Add custom features such as hex M3 nut at your discretion. Design and customize up to a max of no_of_nuts = 0 M3 nuts in your desired arrangement Space out individual M3 nut components from central core using distance measurements: max nut_shaft_distance currently input at one point two units Input diameter measurements for nut-flats ( max five point seven measured ) at a custom level. Define m3 depth by changing m3_nut_depth input to 2 point seven Toggle switch your choice in preference regarding retainer to be active by entering number: retainer =1 for an operational setting Narrow the nut's angle measurement, adjust accordingly as input angle has a default of ninety units Determine and adjust final output settings with customizable options such as increasing the M3 Diameter; Current diameter measurements for a finalized design: M3_Dia: Three point two Final Pulley Tail Height = 16 To achieve this look increase to sixteen Achieve your project's custom look by configuring and changing all above adjustable factors. Design now tailored fit!