htd pulley

thingiverse

Customized version of Thingiverse http://www.thingiverse.com/thing:16627 Created with Customizer! Instructions Using the following settings: additional_tooth_depth 0 motor_shaft diameter is set at 5.2 mm the number of teeth has been adjusted to 14 pulley height is fixed at 8 mm from base pulley thread depth is now set at 12 mm M3 nut flat area measures 5.7 mm retainer plate thickness is specified at 1.5 mm hexagonal M3 nut size has been changed to 1 distance between shaft and the first nut is set at 1.2 mm an idler component with adjustable height feature is available the depth of M3 nut pocket has been updated to 2.7 mm inner diameter for the pulley is a fixed 20 mm teeth additional width is specified as 0.2 mm basic profile remains unchanged at its default setting, 9 adjustable angle option allows a full turn in both directions the total count of nuts used on this device will always remain at one an added retainer with an increased thickness feature is included idler with a fixed height set to match the basic assembly is built