HTC Vive sniper rifle controller for "The Nest" by Croccy22, modified by Alien Identity.Revision 5.

thingiverse

For use with "The NEST" and the "Vive controller". Rev 5 adds hex shaped hollows for hex jam nuts to fit into and 10.25 mm diameter x 4 mm deep holes on the opposite side for Low Head Socket Hex Cap Screws to be seated in, so all bolts and nuts are counter-sunk into the body of the rifle. Imperial size: 15 Low Head Socket Hex Cap Screws, 1/4" UNC x 3/4 inch. 15 1/4" Hex Jam Nuts. Metric size: M6 x 20 Low Head Socket Hex Cap Screws. Quantity 15 M6 Hex Jam Nut. Quantity 15 I have designed the changes to hold the circular section of the Vive controller at 30 degrees below horizontal. Part # 4.9 may need to be removed to install the Vive controller in position, and when it is assembled the Vive controller should be captured. To free the Vive controller from the rifle, part # 4.9 will need to be removed. If you find this works well for you please let me know, and if you encounter any problems tell me so I can see what changes can be made to help you get the features you want. I have added rounded edges to Part 5, now called Part5.3, which is included in the parts list for this thing. I thought it may be more comfortable to use with radised edges to the rifle butt. I have edited Part3, now called Part3.6hh, adding 5mm slots for other parts to fit into. I have added Part 2, now called Part2.6hh, centering the slots and making all slots 5 mm wide, and also making all tabs that fit into the slots 5 mm wide. I have included a jpeg image of the model showing what the modified thing looks like. The Vive controller used in the jpeg image of the model was sourced from another design on thingiverse, "HTC Vive Controller by Stien, published Mar 10, 2016".