HTC Vive Lighthouse Adapters for Plaster/Drywall

thingiverse

**Disclaimer:** I assume no responsibility for any damage to your property, including but not limited to HTC Vive, lighthouses, and associated equipment caused by the improper use of this plate. FILES: Two different versions are included; you will need one per lighthouse: vlh_phsingle.stl - Hanger for single picture hooks vlh_phdual.stl - Hanger for dual picture hooks (preferable for situations where the lighthouse needs to angle to left/right extremes) DESCRIPTION: A bracket that can be hung on the wall using simple picture hooks/hangers from your local supermarket or hardware store. This is a good solution to minimize damage to your wall. The adapter supports hangars and hooks up to 5.5mm wide. Click for hangers I used INSTALLATION: Attach the Vive lighthouse bracket to the flat side of the plate, using your own mounting hardware (or cut down the screws included with the lighthouse bracket). Connect power cable to lighthouse Install on the wall using picture hook. Aim lighthouse as required, and you're set. NOTE: I have mounted both my lighthouses using these brackets; they are solid and safe. They will not fall off the wall like adhesive tapes and other 'sticky' solutions. If you have pictures hanging on the wall, you should be able to take them down and hang your lighthouses there instead. Print Settings Printer: Cocoon Create (Di3/Prusa i3/Mono/Wanhao clone) Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30 Notes: Supports not required; however, personally I use supports touching build plate in Cura.