HTC Vive HMD Wall Mount Lite

prusaprinters

<p>Not so much a remix really as a recreation using <a href="https://www.thingiverse.com/thing:1619580">http://www.thingiverse.com/thing:1619580</a> as a template.</p> <p>I made it a little bit tighter because I had the feeling that with a bit of flex the headset could perhaps push the arms aside and fall out. Also added a slight indentation in the left arm to prevent the system button from being pressed while mounted.</p> <p>This object can be used as part of my All-In-One <a href="/prints/7591-htc-vive-mount-hmd-controllers-charging">HTC Vive Mount HMD + Controllers + charging</a> mounting solution where you'll need only 3 screws to fasten the entire thing to the wall instead of the 6 needed if you mount every piece separately.</p> <h3>Print instructions</h3><p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> Prusa i3 MK2</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.20</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Printed perfectly in PLA using Prusa's default NORMAL settings (with ZHop).</p> <h3> Post-Printing</h3> <p>There are 3 holes for mounting the bracket to the wall. For stand-alone mounting just use the outer 2 holes.</p> <p>If used as part of my All-In-One <a href="/prints/7591-htc-vive-mount-hmd-controllers-charging">HTC Vive Mount HMD + Controllers + charging</a> mounting solution then you only need to use the center hole.</p>