HS Printer test - ver 3

thingiverse

This is a quick and easy test to verify your printer and slicer capabilities. It's a great way to check the quality of your prints after each firmware update and compare different filament options. Choose from three models designed for nozzle sizes 0.35mm, 0.40mm, or 0.5mm to match your printer's specifications. Pay close attention to the print results: * Unsupported bridges on the back * Minimum clearance and wall thickness (nozzle size x 1, x 2, x 3) * Minimum hole size on the bottom (nozzle size x 1, x 2, x 3) * Details of two hemispheres, one filled and one empty * Precision of walls on the parallelepiped, from top to nozzle size x 4 * Details of the filled cylinder * Precision of increasing thickness walls on the empty cylinder (from nozzle size x1 to x 4) * Unsupported spring Verify dimensions of various objects in x, y, and z axes to check your printer's precision. Note that the base is 1mm thick, and other features have specific measurements. If you'd like to suggest additional tests, feel free to comment, and I'll consider them for future versions. Show off your printer's capabilities by printing this model! Take note of the results to compare with my own printer's performance. This design was inspired by CtrlV's model (http://www.thingiverse.com/thing:1019228), so thanks for the inspiration! Print Settings: Printer: New Matter MOD-t Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Notes: You can experiment with different slicing parameters, but I recommend avoiding supports to test unsupported bridges and springs. Post-Printing: Don't post-process the print! This is a printer test, so it's essential to see how your printer performs without any additional processing. If you notice wires or drips, leave them intact to evaluate your printer's capabilities.