Hpi WR8 Flat Run Rim(57x35)

thingiverse

This rim's for 1/8 HPI WR8. Tested only with HPI WR8 flux! I'm sure it can fit some other brands and models, but I haven't checked them because I didn't test them. I tested it both of the aluminum options parts from Aliexpress and original plastic chassis parts, and it works fine. Compatible: ...2.2"/57x80mm original HPI Tarmac tire and Gymkhana tire (#109747)/(#108076) or other tires of suitable size. ...12mm hex (#107876) ...Flanged Lock Nut M4 (#Z684) It has the same dimensions as the original rim (#117413). Note: ...I added two different files "Model 1/Model 2" before you choose for print, please check out all shared pictures. If you choose "Model 2"; you have to complete some trimming after print! (you can use lathe or drill but it has to be good balancing) ...Don't forget to drill air hole after print!(drill oppositely two holes/3mm) ...Support is only required for nut slot, which means you will get a smooth surface quality product! ...The strength of the product depends on the type of filament and the print settings! ...Not tested with original RC tire glue! I used a standard quick-drying very fine adhesive. My Ultimaker2 Print Setting: ...Nozzle / 0.4 ...Layer Height / 0.1 ...Shell Thickness / 0.4 ...Retraction / Enable ...Fill Density / 100 ...Print Speed / 60 ...Support / Touching Build Plate ...Platform Adhesion Type / Brim ...Cooling / Enable (start on the fifteenth or twentieth layer) Esun PLA+ 2.85mm (black/white/yellow/green/grey) Temperature: ...Build Plate 50°C -Print Head- ...White 215°C ...Yellow 215°C ...Black 210°C ...Green 210°C ...Grey 210°C New RC accessories and equipment will be shared soon, follow my profile to not miss!