Hpi WR8 Flat Run Rim(48x33)

thingiverse

This rim is specifically designed for the HPI WR8 rally off-road tire. I've thoroughly tested it with the HPI WR8 Flux, but it's likely compatible with other brands and models - although I haven't checked every option. I've used both aluminum and plastic chassis parts from AliExpress, and it works seamlessly. ---Compatible--- ...1'9"/48mm original HPI rally off-road tire (#107870) ...12mm hex (#107876) ...Flanged Lock Nut M4 (#Z684) This rim shares the exact dimensions of the original HPI #107971. ---Note--- I've provided two model options: 1 and 2. Before printing, please review all attached pictures to select the right one for you. If you choose Model 2, be sure to trim it properly after printing - a lathe or drill will work fine, but balance is crucial. Don't forget to drill an air hole, about 3mm in diameter, and opposite two holes. The product requires support only on the nut slot, ensuring a smooth finish. The strength of this product depends heavily on filament type and print settings. I've used standard quick-drying adhesive for my RC tires - not tested with original tire glue. ---My Ultimaker2 Print Settings--- ...Nozzle / 0.4 ...Layer Height / 0.1 ...Shell Thickness / 0.4 ...Retraction / Enable ...Fill Density / 100% ...Print Speed / 60 ...Support / Touching buildplate ...Platform Adhesion Type / Brim ...Cooling / Enable (start on the fifteenth or twentieth layer) ---Esun PLA+ 2.85mm--- Available in black, white, yellow, green, and grey. ---Temperature--- ...Build Plate / 50°C -Print Head- ...White / 215°C ...Yellow / 215°C ...Black / 210°C ...Green / 210°C ...Grey / 210°C Stay tuned for new RC accessories and equipment - follow my profile to avoid missing out!