Hpi WR8 fifteen52 Rim(57x35)

thingiverse

This rim is a 15mm turbomac clone for the 1/8 HPI WR8. I'm confident it can fit other brands and models, but I didn't research that extensively. I tested both aluminum and original plastic chassis parts from Aliexpress and they work fine. ---Compatible--- * 2.2"/57x80mm original HPI Tarmac tire and Gymkhana tire (#109747)/(#108076) * 12mm hex (#107876) * Flanged Lock Nut M4 (#Z684) It has the same dimensions as the original rim (#117413). ---Note--- * I uploaded two different files "Model 1/Model 2" before printing, please check all shared pictures first. * If you choose Model 2, you'll need to do some trimming after printing! * You can use a lathe or drill for this, but it's crucial that the balancing is good. * Don't forget to drill an air hole after printing! Drill two holes oppositely with a 3mm diameter. * The support is only required for the nut slot, so you'll get a smooth surface quality product! * The strength of the product depends on the type of filament and print settings used! * I haven't tested it with original RC tire glue. Instead, I used standard quick-drying fine adhesive. ---My Ultimaker2 Print Setting--- * Nozzle / 0.4 * Layer Height / 0.1 * Shell Thickness / 0.4 * Retraction / Enable * Fill Density / 100% * Print Speed / 60 mm/s * Support / Touching buildplate * Platform Adhesion Type / Brim * Cooling / Enable (start on the fifteenth or twentieth layer) ---Esun PLA+ 2.85mm (black/white/yellow/green/grey)--- ---Temperature--- * Build Plate 50°C * Print Head - White: 215°C, Yellow: 215°C, Black: 210°C, Green: 210°C, Grey: 210°C New RC accessories and equipment will be shared soon! Follow my profile to stay updated.