HP f210 Dashcam Mount for Vertical Rear Window

prusaprinters

<p>A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van.</p><p>Requires modification to the mount that comes with your dashcam.</p><p>I have printed the parts in PETG and they have survived a summer in Brisbane, Australia without issue!</p><p><strong>Additional Parts</strong>&nbsp;</p><p>1x M4x10 screw</p><p>1x M5 nut</p><p>3x Suction cups with an 8mm stalk</p><p><strong>Assembly (Refer to photo montage)</strong></p><ol><li>Gather all parts required.</li><li>Cut your mount as shown and drill and tap an M4 hole approx. 10mm deep.</li><li>Fit the mount to your dashcam.</li><li>Find your 3D printed parts.</li><li>Insert the M5 nut into the recess in the small bracket.</li><li>Use the screw knob that came with your dashcam to fit the bracket to the main mount.</li><li>Press in the suction cups on the front face as shown.</li><li>Make sure they are well seated.</li><li>Fit the assembly to the dashcam as shown in the first large photo.</li></ol><p>&nbsp;</p>