Housing for Pi Zero with MakerSpot stackable USB-hub
thingiverse
This housing protects your precious Pi Zero paired with the MakerSpots stackable USB-hub. I have thoroughly tested it and customized it specifically for the Raspberry Pi Zero V1.2 and the MakerSpots gen-2 stackable USB-hub. The housing consists of two parts: the bottom part holds the hub, while the top-part holds the Pi. The bottom is snug but accommodates the hub perfectly, secured by 4 M2.5 screws with a maximum length of 6mm. The top-part is also secured with 4 M2.5 screws with a maximum length of 6mm and features one hole for the GPIO header and one for a 12mm x 12mm heatsink. Both pieces fit together seamlessly and are secured by 4 M3 screws (I used 12mm long ones). The plastic spacers, screws, and nuts delivered from MakerSpot are not required with this housing.
With this file you will be able to print Housing for Pi Zero with MakerSpot stackable USB-hub with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Housing for Pi Zero with MakerSpot stackable USB-hub.