Housing for an FPV camera incl. transmitter and battery.

prusaprinters

<p>Housing for an FPV camera incl. transmitter and battery.</p><p>If you don't have a drone handy, the unit is straightforward to get a camera image from the air.<br>The duration of use can be longer with an e-sailplane model than with a drone.<br>So the housing can be quickly mounted to an RC powered model airplane or RC glider.<br>The intended use with me is to find crashed RC models in fields.<br>Of course, there are many uses where a fast image transmission is required.</p><p><br>The housing has space for mounting the camera, battery and transmitter.<br>So an autonomous camera/transmitter unit.<br>Since the transmitter heats up during operation, an additional air scoop was built into the lid for cooling.</p><p>For mounting the housing are 6 holes at the bottom with a distance of 25mm.<br>This allows the most diverse adapters to mount the housing.<br>Attached is a GoPro holder and an adapter plate to the gummis to hang in<br>So you are very flexible.</p><p><br>The following components I used:<br>Camera: Foxeer Razer Mini 1/3 CMOS HD 5MP<br>Battery: Turnigy nano-Tech 460mAh, 3S<br>Transmitter: Eachine TX5258 5,8G 72CH</p><p>As emcee I use an adapter for the cell phone:<br>Eachine ROTG01 UVC OTG 5.8G 150CH Full Channel FPV Receiver For Android Cell Phone Smartphone.</p><p>&nbsp;</p>