House

thingiverse

Create a personalized version of the Thingiverse design at http://www.thingiverse.com/thing:53235 using Customizer! The customization includes gear tolerance at 0.1, generating a mid-gear (GENERATE_MUSIC_CYLINDER = 1), an epsilon value of 0.1 for CSG, MusicCylinderNamePosition set to 0, pulleySnapL at 1.2, crankAxisHolderH at 1.55, MusicCylinderNameDepth at 0.6, pinD at 1.5, pinH at 3, pulleySlack at 0.4, pins with specific positions and dimensions (X's), crankSlack at 0.2, MusicCylinderName as "test song", MusicCylinderNameFont from write/Letters.dxf, generating a music cylinder (GENERATE_MUSIC_CYLINDER = 1), gear hold radius at 4, minimum gear gap at 0.1, generating pulleys (GENERATE_PULLEY = 1), E-PLA value at 8240000, crank length at 18, crank direction at 0, base frequency C0 at 16.3516, gear height at 3, gear gap at 1, teeth holder height and width at 5 each, FOR_PRINT set to 1, axis slack at 0.3, pinNrX at 13, pinNrY at 35, teeth notes (C 0C#0D 0D#0E 0F 0F#0G 0G#0A 0A#0B 0C 1C#1D 1D#1E 1F 1), mid-gear angle at -5, $fn set to 32, note alpha at 5, pteethMinD at 1.5, generating crank (GENERATE_CRANK = 1), crank extra height at 4, music axis holder height at 3.4, generating case (GENERATE_CASE = 1), crank gear angle at 15, music cylinder teeth at 24, tooth gamma at 1.875, generating crank-gear (GENERATE_CRANK_GEAR = 1), crank axis radius at 3, mid-teeth quantity at 20, snap axis slack at 0.35, filament diameter for PLA at 924, pulley height at 10, crank teeth at 8, diametral pitch at 0.6, mid-axis holder height at 3.3, and small mid-teeth quantity at 8. DEBUG_GEARS is set to 0, and a mid-gear cutaway height of 4.