Hotwheels Subaru WRX STI (2016) Display Base

prusaprinters

<p>The display should work with the Subaru from the Fast and Furious set and the one I used is from Boulevard set.</p><p>The display base is separated into 3 parts, name plate, the base and the back plate.</p><h3>Print Settings</h3><p>Nozzle size = 0.4 mm (minimum, smaller better)<br>Layer height = 0.2 mm</p><p>Filament change layer for colours on backplate:<br>1) Starting colours will be the base colours for the "STI" pattern (Mine is red)<br>2) Layer 12 (Base plate colours surrounding the "STI" pattern, mine is blue)<br>3) Layer 19 ("Subaru Rally Team" lettering)</p><p>Filament change layer for colours on name plate:<br>1) Layer 5 (Lettering on name plate)</p><h3>Colours</h3><p>Colours of all other items is your choice.</p><h3>Assembly</h3><p>The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.</p><p>Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.</p>