Hotend Bracket for E3D Volcano and BLTouch (to suit Geeetech printers & Clones)

prusaprinters

I've uploaded my latest hotend for those that use the printers with a 30mm spacing as used on the GeeeTech printers and clones. As I use a Volcano Hotend with a 0.4mm nozzle, and ive decided to go back to a BLTouch for my bed leveling, and when adjusting your marlin firmware the mount has the BLTouch probe 30mm to the left of the nozzle. The screws used are M4 x 20mm and M4 Nuts, the BL Touch is held on with M3 x 12mm and M3 Nuts And to make it easier for some I have uploaded a Gcode file with the parts already laid out to print in the center of the bed, in ABS. And with the correct print settings. Have fun with the new hot end bracket Print Settings Printer: Geeetech i3B Clone Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 30% Notes: Print in ABS for durability I've also included a GCode file already set out to print that has the The bed temp set to 110C and the Hotend to 235C. That has been silced with Simplify 3D Front End bracket Raft: Yes Support: Yes Resolution: 0.2mm Print speed: 1900mm/m Infill: 30% Back End Bracket Raft: No Support: Yes Resolution: 0.2mm Print speed: 1900mm/m Infill: 30% Category: 3D Printer Parts