Hosing Braces

thingiverse

Thanks for viewing! This simple print is made to hold 10mm OD hosing in place, with a small Command™ strip on the flat face(s). I used it to feed hosing from my aquarium to my laundry room, between the wall and ceiling. ✔️ The 1-Sided Brace is meant for ceilings, or walls, where a corner is not available. ✔️ The 2-Sided Brace is meant for corners between walls and ceilings, or walls and the ground, or other structures. Use the 2-sided brace wherever possible, as it provides two faces to add Command™ strips. One Command™ strip can be used on the 2-sided brace, by bending it across the two faces. ✔️ The "Dual" braces are meant for two lines running parallel, available in 1- and 2-sided versions. ✔️ The hosing required for these brackets is 10mm OD (outer diameter) PVC or airline hosing. Smaller outer diameters will work but will have some slack. ✔️ The braces can also be scaled larger/smaller in a 3D printing slicer in order to accommodate different size tubing. Enjoy! Please ♡ if this was helpful, and follow me for more original designs!